User`s guide

1 - 4 Ethernet or Token Ring Bridge
2. Connect the lightning arrestor to one end of the low loss antenna
cable.
NOTE: The lightning arrestor should be connected to the antenna con-
nector on the Wireless Bridge. The lightning arrestor is added to provide
surge protection to the Bridge in the event of voltage surges as a result of
a lightning strike.
3. Connect the antenna to the other end of the low loss antenna cable.
Mount the Bridge antenna at an appropriate elevation to ensure max-
imum path clearance and line of sight considerations.
NOTE: Due to FCC and DOC Regulations, the antenna connectors on
the Aironet Ethernet or Token Ring Bridge are of reverse polarity to the
standard TNC connectors.