User`s guide

xxii Ethernet or Token Ring Bridge
Figure 0.1 - Point-to-Point Wireless Bridge
The Point-to-Point Wireless Bridge Configuration uses two units to bridge two
individual LANs. Packets are sent between the file server and Workstation B
through the Wireless Bridge units (root unit and remote node) over the radio
link. Data packets sent from the file server to Workstation A go through the
wired LAN segment and do not go across the wireless radio link.
Remote Node
(Wireless Bridge)
Root Unit
(Wireless Bridge)
File Server
Workstation A
Workstation B
LAN Segment A
LAN Segment B