User`s guide

I - ii
monitoring used protocols 11-16
overview 11-2
finding a unit 13-4
FTP
downloading firmware/configuration 13-8
menu 13-7
overview 13-7
setting an IP address 6-3
upload firmware 13-9
uploading configurations 13-10
H
HTTP
allowing incoming connections 2-7, 2-14
setting an IP address 6-3
I
Indicator Displays
back panel 1-12
from automatic linktest 4-12
how alarms set status indicator 12-11
locking status indicator 12-13
top panel 1-10
Installation
antenna 1-3
ethernet cable 1-6
indicator displays 1-10
radio tests 4-8
IP address 6-3
IP subnet mask 6-3
L
Linktest 4-8
automatic test on startup 4-12
continuous 4-13
multicast test 4-10
remote test 4-11
specifying the test 4-11
unicast test 4-10
viewing errors 4-12
Loading new firmware/configurations 13-5
via BOOTP/DHCP 13-10
via distribute command 13-11
via FTP 13-7
Locating a unit 13-4
Location string 6-3
logs
clearing the history buffer 12-10
enabling status indicator locking 12-13
error logs 12-5
forwarding logs to Unix syslog 12-13
information logs 12-2
logs from statistic changes 12-12
overview 12-2
severe error alarms 12-5
specifying logs to print 12-11
specifying logs to save 12-11
type of logs to light status indicator 12-11
viewing log history buffer 12-9
M
Map, network 10-6
Menus
command confirmation 2-5
command line mode 2-6
description of a menu 2-2
display commands 2-5
editting characters 2-3
entering commands and information 2-4
selecting an entry 2-3
monitoring packet protocols 11-16
N
Network IDs
controlling display of 10-9
establishing a node name 6-2
Network Map 10-6
Node name
establishing a node name 6-2
P
Packets
and protocols xv
data transparency xv
Passwords
setting 2-13