User`s guide

A-3
Console Port Pin-Out
The Console Port is a DCE using a DB-9 female connector. The follow-
ing table describes the pinouts on the connector and how you should
connect the DB-9 pins to the DB-25 on a terminal. Signal names are in
terms of the DTE.
Most terminals and communication programs will only require Txd, Rxd
and Gnd to communicate with the Aironet Ethernet or Token Ring
Bridge. Some may also require DCD before the connection on-line can
be made. If you use hardware flow control, connect all lines.
Signal DB-9 Male
Aironet Console Port
DB-25 Female
Computer Serial Port
RxD 2 3
TxD 3 2
GND 5 7
DCD 1 8
DTR 4 20
CTS 8 5
RTS 7 4
Signal DB-9 Male
Aironet Console Port
DB-9 Female
Computer Serial Port
RxD 2 2
TxD 3 3
GND 5 5
DCD 1 1
DTR 4 4
CTS 8 8
RTS 7 7