User`s guide

Performing Diagnostics 13 - 9
èTo Download Firmware using FTP:
1. Load the file onto the PC, host, or Bridge you will retrieve from.
2. Select the dest option and type in the IP address of the host PC or
Ethernet or Token Ring Bridge.
3. Select the username option and type in the username required to
access the firmware file.
If downloading from another Ethernet or Token Ring Bridge, the
username option must have a value even though the value is not used
by the remote Ethernet or Token Ring Bridge.
4. Select the password option and type the password associated with
the username.
If downloading from another Ethernet or Token Ring Bridge, the
login password value must match the console write privilege pass-
word on the remote Ethernet or Token Ring Bridge.
5. Select the filename option and type the name of the firmware file you
are retrieving (including drive and directory), then press ENTER.
If downloading from another Ethernet or Token Ring Bridge, the
filename option must have a value even though the value is not used
by the remote Ethernet or Token Ring Bridge.
6. Select the get option.