User`s guide

13 - 2 Ethernet or Token Ring Bridge

Using the Diagnostics Menu

Diagnostics are performed using the Diagnostics Menu. To access this

menu, select Diagnostics from the Main Menu.

Running a Linktest (Linktest)

Use the linktest option to test the quality of the radio transmission

between the Ethernet or Token Ring Bridge and other nodes on the radio

network. See “Running a Linktest” in Chapter 4.

Restarting the Unit (Restart)

Use the restart option to reboot the Ethernet or Token Ring Bridge. All

associations will be lost and the unit will react as though it had just been

powered on.

Returning the Unit to the Default Conﬁguration (Default, Reset)

Use the default option to return the Ethernet or Token Ring Bridge

conﬁguration to its default factory settings. The unit will erase the cur-

rently saved conﬁguration and execute a restart command.

Diagnostics Menu

Option Value Description

1 - Network [ menu ] - Network connection commands

2 - Linktest [ menu ] - Run a link test

3 - Restart - Equivalent to power-up

4 - Defaults - Return to default configuration

5 - Reset - Default parts of the configuration

6 - Load [ menu ] - Load new version of firmware

Enter an option number or name, Ò=Ó main menu, <ESC> previous menu