User`s guide

Setting Up Event Logs 12 - 3
Node “node address” “device name” “ASCII name” removed, max
radio retries
A node was removed from the table because a response was not received
from the node after attempts were made to transmit a packet to it. The
node may have failed or moved to another cell.
Node “node address” “device name” “ASCII name” removed, staled
out
A node was removed from the table because data was not received from
the node within the stale-out period. Different devices have different
stale-out times. PSP nodes have very short stale-out times (around 10
seconds). Non-PSP nodes have longer times (usually several minutes).
Node “node address” “device name” “ASCII name” removed, NV
removed
A node was removed from the association table because the operator
used the “association remove” command.
Node “node address” “device name” “ASCII name” removed,
deassoc notice from “address”
The node was removed from the association table because another
Bridge reported that it now has the node associated locally. This log is
produced whenever a node handoff occurs.
RARP set new IP address
A RARP server answered a request for an IP address with an address
different from the one currently saved. The currently saved value is
overwritten.
Associated to router “node address”
This log is produced when the unit, configured as a repeater, associates
to its parent node.
Removed from the Token Ring (Token Ring Only)
This log is produced when the connection to the Token Ring is removed.
This could be the result of an operator command or a ring error. If it was
the result of an error, the unit will immediately try to reopen the ring.