User`s guide

10 - 8 Ethernet or Token Ring Bridge
For example, suppose there is an Bridge on your accounting LAN and
three end nodes (A, B, and C) within radio range of the Bridge. Only
End Node A should be allowed access to the LAN.
1. Disable auto-association.
2. Add End Node A as a static entry. End Node A is allowed to associ-
ate to the root unit.
3. End Nodes B and C are not allowed to associate.
As another example, suppose you only wanted to block End Node C and
did not care about any other nodes. In this case you would leave auto-
association “On” and add a static entry for End Node C to block it.
Figure 10.1 - Example of Using Static Entry to Restrict Association
Wired LAN
Root Unit
End Node A
End Node B
End Node C