User`s guide

10 - 6 Ethernet or Token Ring Bridge

Association Monitor Menu (Monitor)

The commands in this menu allow you to monitor the location and

movement of all of the radio nodes in the local infrastructure.

Displaying the Network Map (Map)

This command causes the Bridge to poll all of the other Bridges in the

local infrastructure for information about the radio nodes associated to

them. Nodes that are associated to parents are displayed one level from

their parents on the display.

The version column displays the ﬁrmware release level currently

running on the unit. If the responding unit is connected to a Token Ring

or an RS-485 LAN, then its LAN address is displayed after the name

column.

Association Monitor Menu

Option Value Description

1 - Map - Show network map

2 - Trace [ off ] - Trace network associations

Enter an option number or name, Ò=Ó main menu, <ESC> previous menu

NETWORK MAP

Device Node Id IP Address Ver Name

----------- ------------ --------------- ----- -----------------

BRE105E 00409611cd0e 149.023.165.163 4.1G BRE105E_22ff0a

AP4500T 00409611d1e5 149.023.165.169 4.1G hello there

UC4500E 004096207206 149.023.165.176 4.1G UC4500E_207206

LM4500 00409620222a 149.023.165.238

AP4500E 00409611855b 149.023.165.160 4.1B AP4500E_11855b

LM4500 00409620222d

Enter space to redisplay, q[uit]: