User`s guide

Viewing Statistics 9 - 5
Error Statistics
The Ethernet or Token Ring Error Statistics Display provides a detailed
summary of the receiver and transmitter errors that have occurred on the
unit. To access this display, select Statistics from the Main Menu then
select Ethernet or Token Ring from the Statistics Menu.
Token Ring Error Statistics
n Invalid frame received: The Token Ring adapter has received a
frame that was either marked bad in its trailer, had a bad CRC, or
had code violations during the reception of the packet contents.
n Line burst error: The Token Ring adapter had detected illegal
sequence of bits inside a received frame indicating the frame was
corrupted.
n ARI/FCI Error: The Token Ring adapter has detected a loss of sig-
nal on the ring.
n Lost frame error: The Token Ring adapter has transmitted a frame
and failed to see it come back around the ring to be stripped.
n Receiver congested: The Token Ring adapter had no buffer space to
receive a frame from the ring. This is likely due to an excessive
amount of traffic forwarded across the radio, thereby causing a
backlog.
TOKEN RING ERROR STATISTICS
Cleared 3:02:04 ago
-------------------------------------- -------------------------------
Invalid frame received 0 Signal loss 0
Line burst error 0 +1 Hard error 0
ARI/FCI Error 0 Soft error 0
Lost frame error 0 Transmit beacon 0
Receiver congested 0 Lobe wire fault 0
Pkt lost, radio congeste 0 Auto removal error 0
Frame copy error 0 Remove received 0
Token error 2 +2 Ring recovery error 1 +1
DMA bus error 0 Packet too long 0
DMA parity error 0