User`s guide

Installing the Software

3-23

Additional system performance adjustments can be made

with the following parameters.

Table 3.10 - Infrastructure Keywords

Keywords Value Description

BEACONLOSTTIME 0 – 0xFFFF Optional – determines the interval of

consecutively missed beacons

which will cause a re-scan (default is

500 Kµsec).

REFRESHINTERVAL 0 – 0xFFFF Optional – determines the amount of

time in seconds between refresh

packets to the Access Point. Use

0xFFFF to disable (default is 10,000

Kµsec [10 sec]).

SPECIFIEDAPTO 0 – 0xFFFF Optional – time in Kµsec to attempt

to associate to a speciﬁed Access

Point before searching for any avail-

able Access Points (with matching

SSID) (default is 10,000 Kµsec [10

sec]).

AUTHTIMEOUT 0 – 0xFFFF Optional – time to attempt to authen-

ticate to an Access Point (default is

2,000 Kµsec [2 sec]).

AUTHTYPE OFF, OPEN,

HAREDKEY,

ENCRYP-

TONLY

Optional – determines the level of

security of the wireless network

(default is OPEN).

ASSOCIATIONTO 0 – 0xFFFF Optional – indicates the maximum

amount of time the client will wait for

a response to an association

request from the Access Point

(default is 2,000 Kµsec [2 sec]).