User`s guide

Installing the Software
3-7
Windows for Workgroups NDIS2
Installation
1. Power on your computer and start Windows for
Workgroups.
2. Go to the Network program group and click on Network
Set-Up.
3. Under Network Setup, choose Networks.....
4. Under Networks choose Install Microsoft Windows
Network. Select OK.
5. Under Network Setup, choose Drivers....
6. Under Network Drivers, choose Add Adapters.
7. If the drivers were already copied to the hard disk, they
will be displayed in the list.
8. Under Add Adapter, choose the appropriate Wireless
LAN Adapter. If it is not on the menu list, choose
Unlisted or Updated Network Driver. The Install
Driver pop up window will ask you for the Aironet driver
disk.
9. Place the driver disk in drive A:.
10. Type A:\NDIS2\ at the prompt and press Enter.
11. Choose the correct Aironet Adapter and click OK.
12. If the chosen adapter is displayed in the Network
Drivers, click on Setup.
13. Select the appropriate parameters, such as Infrastruc-
ture Mode, SSID, and Bitrate.
14. Exit Windows for Workgroups.
15. To modify the system parameters, edit the
PROTOCOL.INI file in the Windows directory.
16. Reboot your computer.