User`s guide

Installing the Software

3-5

Windows NT NDIS3 Installation

To complete the installation of the Wireless LAN Adapter

using Windows NT:

NOTE: Expansion cards cannot share the same Base

Address or IRQ. Check the switch settings on the

ISA4500 or ISA4800 to ensure they do not conﬂict with

other expansion cards in the computer.

1. Shutdown the Windows NT workstation.

2. Insert the Wireless LAN Adapter into one of the slots.

NOTE: PnP must be enabled. See “Conﬁguring the DIP

Switches (ISA Only)” in Section 2.

3. Power up the Windows NT workstation.

4. From the control panel, select the Network icon.

8. Insert the driver disk provided with the adapter into

the appropriate drive.

9. Type A:\NDIS3 at the prompt and press Enter.

For Windows NT 4.xxx For Windows NT 3.51

5. Select Adapters. Select Add Adapters.

6. Select Add. Select <Other> Require

disk from manufacturer

from the list of adapters.

7. Select Have Disk. Select Continue.