User`s guide

Installing the Hardware
2-8
Base Address
The Wireless LAN Adapter uses 64 bytes of shared
memory space with a base address that can be set to
any boundary between 0xC000 and 0xDE00. The
default factory setting is 0xD000. The Base Address is
controlled through DIP switches 4 and 5.
NOTE: When PnP is selected, the information in the
table below will read “Don’t Care”.
DIP Switch
6
On (Non-PnP) Off (PnP)
DIP Switch Base Address
54
On On 140
On Off 180
Off On 300
Off Off 340