User`s guide

Installing the Hardware

2-4

Installing the Wireless LAN Adapter

NOTE: The following procedures and physical

connections apply generally to normal and conventional

slots. In the cases of custom or non-conventional

equipment, be alert to possible differences in slot

conﬁgurations.

Installation

1. Power off all computer system components.

2. Remove the CPU cover.

3. Remove the screw from the top of the CPU back

panel. This screw is used to hold the metal bracket

on the back panel.

CAUTION: Static electricity can be destructive.

Discharge by touching a metal part of a grounded unit

before removing the Wireless LAN Adapter from the anti-

static packaging.

4. Tilt the Wireless LAN Adapter to allow the antenna

connector and LED lights to slip through the open-

ing in the CPU back panel.