User`s guide

Installation
2- 8
Back Panel Indicators
The back panel indicators are:
•
10BaseT polarity: Solid amber to indicate the
10BaseT polarity is reversed. Check cable
connections.
•
10BaseT active: Solid green to indicate the 10BaseT
has been configured as the active port.
•
Ethernet Rx: Flashes green when an Ethernet packet
has been received.
•
Ethernet Tx: Flashes green when an Ethernet packet
has been transmitted.
•
10Base2 active: Solid green to indicate the 10Base2
has been configured as the active port.
•
Packet Collision: Flashes amber to indicate a packet
collision has occurred.
Packet
Collision
Ethernet Tx
10BaseT polarity
10BaseT active
Ethernet Rx
10Base2 active