User`s guide

Installation
2- 2
Installing the Console Port Cable
1. Attach the Console Port cable to the serial port. Attach
the other cable end to the serial port on a terminal or a
PC running a terminal emulation program. Use a 9-pin
male to 9-pin female straight through cable.
NOTE: This connection is required for setting up initial
configuration information. After configuration is
completed, this cable may be removed until additional
configuration is required via the serial port.
2. Set the terminal to 9600 Baud, No-Parity, 8 data bits,
1 Stop bit, and ANSI compatible.