Installation guide

There are many different installation options available, which depends on customer requirements. Brackets
are available from Cisco as well as third−party companies. During the ordering process, make sure to choose
one of two brackets (but not both). Each bracket is a zero−dollar ($0) option at the time of configuration. If a
bracket is not chosen, the selection default is AIR−AP−BRACKET−1, which is the most popular for ceiling
installations. The other choice is a universal bracket that carries part number AIR−AP−BRACKET−2 (figure
8).
Figure 8  Access Point Bracket Choices  If using AP 3600 module the AIR−AP−Bracket−2 is
recommended
If the AP is mounted directly to a ceiling on the gridwork, then AIR−AP−BRACKET−1 mounts flush and has
the lowest profile. However, if the AP is mounted to an electrical box or other wiring fixture, or inside a
NEMA enclosure or wall mounted, then AIR−AP−BRACKET−2 is a better choice. The extra space in the
bracket allows for wiring, and the extra holes line up with many popular electrical boxes. When mounting the