User`s guide

3 - 30 Aironet PCMCIA Wireless LAN Adapter
Configuring the Client Card
Use the Configure Device option, to configure the Aironet Client Card
with the system parameters you have set. Once the Client Card is config-
ured, all settings will remain in non-volatile memory and will not
change until re-configured. When you select the Configure Device
option, the diagnostic tests described in the previous section are auto-
matically performed. The results are displayed on screen as shown in the
sample below.
Interrupt Test: Sends a packet out and receives the interrupt level set-
tings through the port.
Cable Test: Sends packets out to check the cable connection by seeing
how many packets are lost.
Configuration: Sends the configuration to the Client Card.
The Client Card will only be configured if all diagnostics test results are
“Passed.” If the result is “Configuration Failed,” press the up arrow key
to view the on-line troubleshooting tips. See
Chapter 4 - Troubleshoot-
ing and Performance.
Once the Client Card is configured, press any key to return to the Main
Menu.
Configure Device
Shared Memory Test: Passed
Self Test: Passed
Command Test: Passed
Interrupt Test: Passed
Configuration: Passed
Device Successfully Configured
Error Report OK