User`s guide

3 - 28 Aironet PCMCIA Wireless LAN Adapter
Menu Descriptions
Save File - Saves current configuration parameter settings to disk. If
you are configuring multiple Aironet Client Cards to the same parame-
ters, you should choose the Save Option when setting the parameters for
the first time.
This will allow you to automatically configure the other Client Cards
with the same parameters.
Keep in mind, though, you do not have to save the parameters specifi-
cally to the ARLAN.CFG file to configure the Client Card with the
parameters you have set. To save to a different file, use the Save As
Command. (See also
Configuring the Client Card
.)
Save As - Used to save the configuration parameters to a different file.
Load File - Loads the configuration parameters settings from the file
specified.
Performing Diagnostics (Perform Diagnostics)
Use the Perform Diagnostics function to perform diagnostic tests on
your Aironet Client Card. When you select the Perform Diagnostics
function, the diagnostic test begins immediately, and as each item is
tested, the results are shown on screen as follows:
ARLAN Card Diagnostics
Diagnostics Complete: Passed
Self Test: Passed
Command Test: Passed
Interrupt Test: Passed
Diagnostic Complete
Error Report OK