User`s guide

Utilities 3 - 17
Setting the Base Address and IRQ Levels
The IRQ level is not required to be set for an Aironet PCMCIA.
The Base Address must match that of your computers available memory.
Setting System Parameters
Use the System Parameters option to set the Aironet Client Card system
configurations. When you select the System Parameters option the fol-
lowing window appears:
Registration Mode
Use the Registration Mode parameter to specify whether you are operat-
ing in ARLAN, PSP or Non-ARLAN mode. The default setting is
ARLAN Mode.
Set to “ARLAN” when operating with Aironet Access Points
Set to “PSP” when operating with battery-powered devices
Set to “Non-ARLAN” when operating in Peer-to-Peer mode with
other Aironet Client Cards and no Aironet Access Points (see
Regis-
tration Modes
for a detailed explanation).
System Parameters- ARLAN.CFG
Registration Mode ARLAN
System ID 00 00 00 02
NID NOT SPECIFIED
Specified Router NOT SPECIFIED
Device Name
Priority Normal