User`s guide

1 - 6 Aironet PCMCIA Wireless LAN Adapter
To Remove the Client Card and Radio Module:
1. Turn off the computer.
2. Eject the Client Card PCMCIA Card.
3. Remove the Radio Module from the mounting plate.
4. Detach the Radio Module tether cable from the Client Card.
CAUTION:
The Client Card PCMCIA Card can be left in the computer
without the Radio Module attached. However, NEVER connect the Radio
Module to the Card with the computer powered on.
Viewing the LED Display
The LED Display is located on the front of the Radio Module as shown
in Figure 1.5 and as described in Table 1.1.
Figure 1.5 - LED Display
Activity LED
Status LED