User`s guide

1 - 4 Aironet PCMCIA Wireless LAN Adapter
CAUTION:
The Radio Module is power bearing and should be attached to
the Client Card before inserting the Adapter into the computer. NEVER
attach the Radio Module to the Client Card if the Adapter is in the com-
puter and the computer is powered on.
To Install the Radio Module and the Client Card:
1. Turn the computer off.
2. Attach the Radio Module Tether Cable connector into the end slot of
the PCMCIA Card as shown in Figure 1.3.
Figure 1.3 - Attaching the Radio Module to the Client Card
3. Locate the Type II PCMCIA slot on your computer.
4. Hold the Client Card with the label-side up and the arrow pointing
toward the slot.
5. Insert the Client Card into the Type II slot as shown in Figure 1.4.
Make sure you insert the card firmly into the slot until it clicks into
position.