User`s guide

Introduction to the Aironet PCMCIA Wireless LAN Adapter xi
Aironet Configuration Diskette
The Aironet Configuration diskette contains Network software drivers
for Novell, NDIS, ODI, TCP/IP, OS/2 and Microsoft LAN Manager, as
well as diagnostic utilities.
NOTE: Before performing any task, make a copy of the Aironet Configura-
tion diskette and store the original diskette in a safe place. Use the DOS
DISKCOPY command, that is, “desktop a: b:”. Do not use the DOS COPY
command since the diskette contains subdirectories.
System Requirements
Installation of the Aironet Client Card requires:
A computer with a Type II PCMCIA slot
MS-DOS 2.0 or higher
One free 8K expansion memory address block (ranges between
0xC000 and 0xDE00)
A PCMCIA card and socket services compliant with revision 2.10 of
the PCMCIA specification (or higher)
Free memory capacity to load a LAN operating system. Depending
on the LAN operating system, you will need additional free memory.
Consult the relevant LAN documentation for the exact memory
requirements.
Networking Compatibility
The Aironet Client Card is designed for use with industry standard net-
work operating systems. The following Network software drivers are
supplied on the Aironet Configuration diskette:
Novell Netware including SFT/Advanced Netware 286 version 2.1
and up, Entry Level System-Level 2 (8 users), Netware 386 version
3.1 or later.
NDIS Drivers - for NDIS-compliant LAN operating systems such as
Microsoft LAN Manager and PC LAN, Windows for WorkGroups,
Windows 3.1, and Windows 95.