Assembly Instructions

OPT1-M-104 Rev.01 Optimus-1 EX - FTS Mast Assembly Procedure
Page 31 of 33
5. Connect the POE+ Ethernet + DC port (POE port) into CBL-00168 cable (connected into
Surge protector "2SP4") (see Figure 29).
6. Connect the POE+ Ethernet port (10/100 port) into the MOXA at port 4 with short CAT6A
cable (0.5m) (see Figure 29).
Figure 29 Connect cables into the RJ45 interfaces
Connect into
"2SP4" via
CBL-00168
Connect to
MOXA "Port 4"