Assembly Instructions

OPT1-M-104 Rev.01 Optimus-1 EX - FTS Mast Assembly Procedure
Page 15 of 33
4 FTS Mast Unit Electrical Assembly
4.1 SIM Card Installation
To install the SIM card into the FTS mast unit box, do the following:
1. Make sure that the FTS unit isn’t connected to any power source, neither AC (via POE
port) or Battery power.
2. Unscrew the 4 screws from the lid of the FTS box and open the FTS cover (see Figure 8).
Figure 8 Open the lid of the FTS mast unit box