Manualshelf

Specifications

ManualsBrandsAirmux ManualsComputer equipmentAirmux-200
919293949596979899100
Installation and Operation Manual Chapter 4 Configuration
Airmux-200 Ver. 1.750 Displaying the Inventory 4-29
Airmux-200 enters install mode and the beeper starts beeping.
4. Realign the ODUs and complete the Installation wizard (see
Chapter2
).
4.20 Resetting Airmux-200
Resetting the link causes service disconnection.
In order to maintain the link configuration, reset the remote Airmux-200 first
.
To reset Airmux-200:
1. From Maintenance, reset the remote Airmux-200.
2. From Maintenance, reset the local Airmux-200.
To reset to Factory Defaults
1. Click Configuration in the Menu bar and select any one of the sites.
The Configuration dialog box opens.
2. Select Operations in the Configuration dialog box.
3. Click the Restore Defaults button.
A message box asking if you want to restore factory default appears.
4. Click the check box if you want to keep the current IP settings.
5. Click Yes to continue.
4.21 Displaying the Inventory
To view the inventory data
1. Click Configuration from the main menu.
2. Select which site to configure.
The configuration dialog box opens.
3. Select Inventory (
Figure 4-21
).
This screen is for viewing purposes only.
Note
Note