Specifications

Chapter 4 Configuration Installation and Operation Manual
4-26 Muting the Beeper Airmux-200 Ver. 1.750
 To change the Link Password:
1. From the Configuration dialog box, select the Security tab
2. Click Change next to the Link Password field box.
The Change Link Password dialog box appears.
3. Enter the current link password.
4. Enter the new password.
5. Enter the new password again in the Confirm box.
Forgotten the Link Password
In case of a forgotten link password, the user may enter the key password
supplied with the product. The key password may be obtained from customer
support after validation of the device serial number or MAC address. The user
may change the link password of both sides of the link at any time using the Link
Configuration Wizard.
 To enter the key password:
1. From the Configuration dialog box, select the Security tab.
2. Click Change next to the Link Password field box.
The Change Link Password dialog box appears.
3. Click the Forgot Link Password button.
The Key Link Password dialog box appears.
4. Type the key link password.
A new link password may now be set.
4.16 Muting the Beeper
The ODU beeper starts beeping as soon as power is supplied, and continues until
the ODUs are aligned and the link established.
It is possible to mute the beeper until the alignment procedure is to be
performed.
 To mute the beeper:
1. Click on Configuration in the Menu bar and select the relevant site.
The Configuration dialog box opens.
2. In the Configuration dialog box, click the Buzzer button. The button toggles
between on and off.
The Beeper stops.