Specifications

Installation and Operation Manual Chapter 4 Configuration
Airmux-200 Ver. 1.750 Changing Passwords 4-25
Figure 4-19. Alternative Community Dialog box
4.15 Changing Passwords
There are two passwords necessary to use the Airmux-200 system. The first is
encountered when running the management software, the second, the link
Password is used for encryption purposes and is found when installing or
configuring the link.
Changing the Management Password
 To change the management password
1. From the Tools menu, select Change Password
2. The Change Password dialog box appears.
3. Enter current password, and new password.
4. Click OK to confirm.
Changing the Link Password
Airmux-200 Radio Link is encrypted using Advanced Encryption System (AES)
using a 128 bit dynamic key. During the installation process a Link Password must
be set. An Initial encryption key is generated. Each time a link is established the
Encryption key is validated. If the validation failed the link is established but no
service or configuration is allowed. In this state the user can change the link
password of each of the sites.