Specifications

Chapter 4 Configuration Installation and Operation Manual
4-22 Configuring the Jitter Buffer Airmux-200 Ver. 1.750
4.13 Configuring the Jitter Buffer
To increase system resistance to interference the Jitter buffer, the receiver jitter
buffer for each site can be enlarged by configuration. The larger the jitter buffer,
the longer the interference period that the system overcomes without TDM BER.
You can also decrease the jitter buffer to decrease the system delay.
The jitter buffer can be configured between 2.1 and 16.0 milliseconds.
 To configure the Jitter Buffer:
1. In the Main menu click the Link Configuration button.
2. Run the Configuration wizard.
3. On the Services screen, select the TDM Jitter Buffer tab:
Figure 4-17: Jitter Buffer Configuration
4. Choose the desired values for HQ and Remote Site.
After setting the new value, the user must evaluate the expected quality.
During the evaluation the ETBE bar is displayed.
5. Click Next > to perform the change or < Back to cancel the change.