Specifications

Chapter 4 Configuration Installation and Operation Manual
4-18 Setting the Date and Time Airmux-200 Ver. 1.750
recommended since reset, power up, or synchronization with an NTP server will
override the setting.
• The NTP uses UDP port 123. If a firewall is configured between the ODU and
the NTP server this port must be opened.
(Windows XP command w32tm /stripchart /computer:<server IP> can be use to
check the NTP server connectivity).
• It can take up to 8 minutes for the NTP to synchronize the ODU date and time.
 To set Date and time
1. Click Configuration from the main menu.
2. Select which site to configure.
The Configuration dialog box opens.
3. Select Date & Time (see
Figure 4-14 ).
Figure 4-14. Date & Time Configuration
4. If entering an address for the NTP Server, click Clear, and then enter the new
address.
5. Set the Offset value.
6. To manually set the date and time, click Change (
Figure 4-15 ) and edit the
new values.
Note