Specifications

Chapter 4 Configuration Installation and Operation Manual
4-8 Configuring TDM Operation Airmux-200 Ver. 1.750
The TDM Parameters dialog box or the Finish screen appears depending
on which services were selected.
Figure 4-6. Service Parameters Dialog Box, E1/T1 Interface
4.4 Configuring TDM Operation
Setting the Clock Configuration
The TDM clock feature is enabled in all carrier class IDU’s in addition to new
hardware IDU’s. A TDM dialog box will appear where IDU supports the clocking
configuration feature (see
Figure 4-7 and Figure 4-8 ).
A new master clock configuration option is available in the Link Configuration
Wizard. The automatic mode selects the clock from the first trunk that is working
in normal mode (or is configured to loop-back maintenance). If a specific trunk is
selected, this trunk shall be used as the system master regardless of the trunks
state. The current master clock trunk is also displayed.