Specifications

Chapter 4 Configuration Installation and Operation Manual
4-6 Selecting Channels Airmux-200 Ver. 1.750
The maximum rate is selected according to the link conditions
The quality bar shows the adjustment until the system finds the best
quality link.
5. Click Next.
The Service Parameters dialog box appears.
Airmux-200 BRS Version
Both sites in a BRS Link must be configured identically.
Any changes to the frequency settings cause the link to re-synchronize. A short
loss of service will occur during re-synchronization.
 To Configure BRS Channel Settings
1. Set the Band Plan.
2. Select the Bandwidth required: Single Band or Double Band.
3. Select the Frequency from the pull-down menu.
4. Click Next. The system is re-synchronized to the changes.
Figure 4-5. BRS Channel Settings Post-Transition
Note