Specifications

Installation and Operation Manual Chapter 4 Configuration

Airmux-200 Ver. 1.750 Selecting Channels 4-5

Figure 4-4. Channel Select Dialog Box (DFS, ETSI Requirement)

The sign on the configuration Wizard and Status bar indicates that the radar

detection is on.

 To define automatic channel selection in the 5.4 ETSI version

1. Select the main frequency from the Operating Channel menu.

Automatic Channel Selection is selected by default.

2. Click at least two check boxes in the Available Channels List of all the

allowable channels that can be automatically selected.

Installation will not continue until at least two channels are defined.

Selecting a new channel causes the system quality to change. The quality bar

shows the adjustment until the system finds the best quality link.

Any channel selected is evaluated for 60 seconds; therefore this selection

process may take a few minutes.

3. If you are not satisfied with the channel that is selected automatically, click

Reselect Channel.

A new channel will be selected from one of the Available Channels that

have been defined.

The reselection process may take a few minutes.

4. Click Next.

Note