Specifications

Installation and Operation Manual Chapter 3 Operation
Airmux-200 Ver. 1.750 Turning Off Airmux-200 3-7
Figure 3-5. Ethernet Bandwidth Indication
 To change link configuration parameters:
1. In the Main menu, click Configure Link.
The Configure Link wizard appears. See
Chapter 4 for configuration
details.
2. Click Next.
3. Continue through the configuration wizard and define the Link name and ID,
Channel, Rate and Services.
4. Once you finish changing configuration parameters, click Finish.
The system takes a few seconds to activate the link with the new
configuration.
3.5 Turning Off Airmux-200
 To turn off Airmux-200:
1. Exit the management application.
2. Remove the AC/DC converter power cord from the mains.