Specifications

Chapter 3 Operation Installation and Operation Manual
3-6 Managing Airmux-200 Airmux-200 Ver. 1.750
• Monitor Pane – displays the link quality between local and remote devices
and the following statistics:
 Radio signal strength (RSS) in dBm
 Current Ethernet bandwidth in Mbps. This is not the actual traffic rate,
but the maximum capacity that can be supported currently, see
Figure 3-5 .
The scale on the bar adjusts according the link distance and the link
budget.
 Local/remote receive and transmit traffic rate, in Mbps or Fps (frames per
second).
 TDM status
The Estimated Time Between Errors bar gives an indication of the TDM
quality. The ETBE constantly calculates the expected TDM Error second
ratio according to the current air interface conditions.
 Link Status. Shows the channel frequency. The color of the box indicates
the status.
Green is an active link
Red is an inactive link
Magenta shows an authentication or compatibility problem
Brown shows severe compatibility problem.
• Event Log – stores alarms generated by local and remote units.
• Status Bar – displays the following ions:
 Connectivity icon showing how the device is connected to the Ethernet.
 Network mode to the local unit – using IP of the local unit
 Over the Air connection - using IP address of the remote for over the
air connection
 Local mode using broadcast - direct connection to IDU LAN port
without IP address. This mode is only recommended when the
managed PC is connected directly to the IDU (no network involved)
the managed PC must have a static IP configured. (No DHCP)
 Encryption icon showing if the link is encrypted:
encrypted link
Link Password Validation failed. The link is encrypted with default
keys. Service and configuration is unavailable. Need to change the link
password in either site
No Encryption – An older release is used, no encryption is available.