Specifications

Chapter 3 Operation Installation and Operation Manual
3-4 Managing Airmux-200 Airmux-200 Ver. 1.750
3.3 Default Settings
Table 3-5 lists the default settings of the Airmux-200 configuration parameters.
Table 3-5. Default Settings
Parameter Default Value
ODU IP Address 10.0.0.120
Subnet Mask 255.0.0.0
SSID –
Frequency First Frequency in the range
Rate Adaptive
Services Ethernet
Ethernet Configuration Auto Detect
Bridge Hub Mode.
Aging time = 300 sec
Community values Read-write – netman
Local – public-bru1
Remote – public-bru4097
3.4 Managing Airmux-200
Before starting a management session, make sure that a communication link
between local and remote units exists. The Link Status indication bar in the
middle of the Main menu must be green and the
Radio Link - Sync message must
appear in the event log (see
Figure 3-4 ).