Specifications

Airmux-200 Ver. 1.750 Controls and Indicators 3-1
Chapter 3
Operation
This section provides the following information for Airmux-200:
• Operating procedures (turning-on and turning-off)
• IDU indicators
• Normal Indications
• Default settings
• Managing the Airmux-200
3.1 Turning On Airmux-200
 To turn on Airmux-200:
• Connect the AC/DC converter to the IDU power connector and to the mains.
See
Chapter 2 for full instructions on connecting the power.
The PWR indicator lights up (IDU only) and remains lit as long as the IDU
is receiving power.
Airmux-200 requires no operator attention once installed, with the exception of
occasional monitoring of front panel indicators and statistics data. Intervention is
only required when Airmux-200 must be configured to its operational
requirements, or diagnostic tests are performed.
3.2 Controls and Indicators
IDU Front Panel Indicators
The front panel of the IDU and IDU includes a series of LED indicators that show
the operating status of the unit.
Figure 3-1 shows the IDU front panel, Figure 3-2
shows an IDU-E front panel. Table 3-1, Table 3-2 , and Table 3-3 describe the
indicators.