Specifications

Installation and Operation Manual Chapter 2 Installation and Setup
Airmux-200 Ver. 1.750 Installing the Link 2-19
The Evaluating Rate box appears. The optimum rate for the link is
selected.
The Service Parameters dialog box opens.
Airmux-200 BRS Version
Both sites in a BRS Link must be configured identically.
Any changes to the frequency settings cause the link to re-synchronize. A short
loss of service will occur during re-synchronization.
 To Configure BRS Channel Settings
1. Select the Band Plan.
2. Select the Bandwidth required: Single Band or Double Band.
3. Select the Frequency from the pull-down menu.
4. Click Next. The system is re-synchronized to the changes.
Figure 2-16. BRS Channel Settings Post-Transition
Note