Specifications

Chapter 2 Installation and Setup Installation and Operation Manual
2-14 Installing the Link Airmux-200 Ver. 1.750
2.13 Installing the Link
During the installation procedure, the definition of all parameters is automatically
applied to both sides of the link.
For HSS screens see Appendix F .
 To install the link:
1. Verify that the management station is properly connected to the same LAN
as the IDU, and the Airmux-200 Manager application is running.
2. With BRS systems you need to activate the link at both sites, see
Appendix G
for method. Once the link is activated, continue installation from this point.
3. In the toolbar, click the Link Installation button.
The Installation wizard opens, (see
Figure 2-12 ).
Figure 2-12. Link Installation Wizard
4. Click Next to proceed with the installation procedure.
A message box is displayed.
Note