Specifications

Installation and Operation Manual Chapter 2 Installation and Setup
Airmux-200 Ver. 1.750 Starting the Airmux-200 Manager Software 2-11
Figure 2-8. Login Screen
3. Select the Connection Mode for the IP Address:
 Local Mode:
Select Local Connection (Broadcast), if user is connected directly to the
IDU LAN port.
 Network Mode
Enter IP address (of the ODU)
Default address: 10.0.0.120
The Subnet mask is 255.0.0.0. Versions 1.700 and up, any valid subnet
mask may be used.
The actual IP address is defined during link configuration (see Defining the
Management Addresses).
4. Enter the password
Default password –
admin (see the section on Changing the Management
Password
)
5. Click the Read Only Mode check box if entering the system as a Read only
user.
6. If you are a user with Read-Write permission, click Options to enter the
community options.
Airmux-200 is protected with community passwords. A user may be defined
with read-only permission or with read-write permission. See the section
Changing Community Values for more detail.
Note