Specifications

Installation and Operation Manual Chapter 2 Installation and Setup
Airmux-200 Ver. 1.750 Installation Sequence 2-3
2.4 Additional Equipment Required
The following is a list of the equipment required for installing the Airmux-200
hardware:
• RJ-45 crimp tool (if pre-assembled ODU/IDU cable is not used)
• Drill (for wall mounting only)
• IDU and ODU grounding cables
• O-PoE 10AWG grounding cable
• 13 mm (½″) spanner/wrench
• Cable ties
• Laptop running Windows 2000 or Windows XP.
2.5 Installation Sequence
Install the Airmux-200 system according to the following the steps:
1. Mount ODUs at both sites of the link.
2. Assemble the ODU cable and connecting ODU to IDU or O-PoE at both sites.
3. Connect the power.
4. Align the ODUs.
5. Install the management program on the network management station.
6. Run the installation wizard from the management program.
7. Connect user equipment to the local and remote IDUs.
Figure 2-1 illustrates a typical installation of Airmux-200 with an external
antenna.