Specifications

Airmux-200 Ver. 1.750 BRS Link Activation G-1
Appendix G
BRS Installation Procedure
G.1 BRS Link Activation
In accordance with 2.5 GHz standard, Airmux-200-BRS systems links must be
activated before use. This is done at both ODUs independently before installation
on site. Both ODUs must be configured the same.
 To Activate a BRS Link
1. Install Airmux-200 Manager software as usual.
2. When the Manager Main Screen is displayed it appears with the Link Status
label red and showing Inactive. The Link Configuration and Link installation
buttons are disabled.
Figure G-1. Inactive Manager Screen
3. Click Configuration>Configure Location
The Air Interface dialog box opens,
Figure G-2 .