Specifications

Installation and Operation Manual Chapter 5 Diagnostics and Troubleshooting
Airmux-200 Ver. 1.750 Error Detection and Alarms 5-7
Table 5-2. Action Of The Tool Bar Button Commands
Button Action
Get Data Uploads the selected report from the ODU.
Save Saves the data in a CSV or Text format for additional analysis.
Clear Removes the current data from the window.
Selection pane Selects the site, interface, and interval to be displayed.
Threshold Opens the threshold configuration dialog box (Figure 5-5) to set the
Air Interface thresholds. Note that threshold change is effected
immediately, but it does not change any historical data.
Close Closes the Performance Monitor Report window.
Figure 5-5. Threshold Configuration Dialog Box
5.4 Error Detection and Alarms
Airmux-200 detects compatibility problems, fault conditions of the radio or user
links, and initiates alarms to alert the user.
To store the Event Log, first define the IP address, subnet mask, default gateway
and trap address of the management PC, see
Chapter 4 for details.
Alarms (traps) are displayed in the Event Log in the lower panel of the Main Menu
screen. The event log may be saved as a TXT file.
The event log includes the following fields:
• Sequential number (ID)
• Date and time stamp
• Message
• Trap source
• IP address of the ODU that initiated alarm.
Note