Use and Care Manual



When the [Max2 Change] indicator is on, replace your Max2 filters on both sides. Follow these instructions below to
replace the filters.
1


Covers ▶ Pre-filters ▶ Max2 filters
2


Discard the old Max2 filters. These are not
reusable.

•
When removing the plastic wrapping from
the filters, be careful not to damage the
surface of filters.
•
Do not allow children to play with the
plastic wrapping.
3



Max2 filters ▶ Pre-filters ▶ Covers

•
Place the Max2 filters into the filter case with
the green side facing the product. Reversed
placement may affect the filter lifetime.
•
The product will not turn on if the right and
left covers are installed incorrectly.
4




After replacing the Max2 filters, you must
reset the filter’s replacement cycle using
the [Max2 Change] button.
1
2
Max2 filter Pre-filter Cover
FRONT/전면/前
FRONT/전면/前
1
2
Max2 filter Pre-filter Cover