Use and Care Manual
Touch this button to connect to a Wi-Fi
network. When the Wi-Fi connection is
completed, the indicator is turned on.
* The status of Wi-Fi LED :
- Blinking : Not connected yet or in the
pairing process
- Constant LED: Wi-Fi connected
- LED off: Wi-Fi off
Touch this button to automatically turn
off after an hour, 4 hours, or 8 hours.
For 400S users, you can set the timer
and scheduler using Airmega mobile
application.
Touch this button to turn the air
quality indicator and light on or off.
This sensor detects the intensity
of light. When the product is set to
Smart mode and it is dark,
for 3 minutes, the product enters
Sleep mode automatically.
However, if the air speed is set
manually or pollution level is
above normal (in Smart mode),
Sleep mode will not be activated
automatically.
Shows the pre-filter cleaning cycle at 5 levels
(100 %, 80 %, 60 %, 40 %, 20 %, 0 %). When the
letters on button is lit, it indicates that
the pre-filters need to be cleaned.
Shows the Max2 filter lifetime at 5 levels
(100 %, 80 %, 60 %, 40 %, 20 %, 0 %). When the
letters on button is lit, it indicates that the Max2
filters need to be replaced.