Brochure

ManualsBrandsAirmaster Fan ManualsCooling Fans20" Washdown Pedestal Fan, 2,670 CFM, 1/15 HP, 1 Phase

Submittal sheets available at www.airmasterfan.com

Warning: Cancer and Reproductive Harm www.P65Warnings.ca.gov

This warning is applicable to all products on this page, see page i2 for more information

APPLICATIONS

FOOD SERVICE DAIRY BARNS

HOSPITALS POULTRY HOUSES

FOOD PROCESSING FISHERIES

Floor Model

Wall Model

*CORD AND PLUG NOT PROVIDED WITH 115V or 115/230V MODELS. MUST BE HARD WIRED. WIRING MUST CONFORM TO ALL

NATIONAL STATE AND LOCAL CODES

10 Year Warranty

Features

• 115V, 1/15 HP (20”) and 115/230V, 1/4 HP (24”), 1/3 HP (30”), 1 Phase, Totally Enclosed

Non-Vented, Ball Bearing Motor

• Constructed with Electro-polished 304 Stainless Steel Meets the USDA and the NSF

Requirements for “Food Zones”

• Designed to Withstand Moist/Wet Environments, High Pressure Cleaning with Concentrated

Caustic Solutions without Affecting Performance or Function.

• Performance Ratings are conducted in accordance with AMCA Standard 230-99

• Available in Non-Adjustable Pedestal or Wall Mount

• Motor Washdown Specication is IEC-IP55

• Guards meet OSHA Standards

• All Stainless Steel Motor

Washdown Air Circulators

EDP No. Catalog No. Prop Dia. Fan Style HP

CFM RPM

Motor No. Ship Wt.

High Low High Low

70834 PWIISS20 20” Floor Model 1/15

2670 1670 1600 1000 5B

70833 WWIISS20 20” Wall Model 1/15 52

70836 PWIISS24 24” Floor Model 1/4

5220 1075 4G

70835 WWIISS24 24” Wall Model 1/4 62

70764 PWIISS30 30” Floor Model 1/3

8800 1075 4H

70767 WWIISS30 30” Wall Model 1/3 64

Note: When assembling fans use only the stainless steel fasteners supplied with the motors. Fans and motors should be cleaned and inspected regularly.

A safety cable kit is included in all overhead mounted air circulators to prevent the fan from falling if accidentally struck or mounting fails. Single safety cable kits consiste

of 12 feet of 1/16” diameter cable, 2 cable clamps and instructions.

Chemical Concentration Stainless Steel Parts

Water:

De-Ionized Boiling 100% Excellent

Salt (Immersed) 30% Excellent

Salt (Spray) 5% Excellent

Tap - 250°/120° @10,000 PSI 100% Excellent

Acids:

Hydrochloric 35% Poor

Sulfuric 25% Poor

Nitric 35% Excellent

Picric Saturated Solution Excellent

Base:

Caustic 100% Excellent

Caustic 12pH Excellent

Caustic - 1250 F/500 C - Excellent

Chemical Resistance Rating Chart

Stainless Steel Food Service Air Circulators Unit Pack Models

Non-Oscillating

Summary of content (2 pages)

PAGE 1
Washdown Air Circulators Stainless Steel Food Service Air Circulators Unit Pack Models Non-Oscillating 10 Year Warranty Features • 115V, 1/15 HP (20”) and 115/230V, 1/4 HP (24”), 1/3 HP (30”), 1 Phase, Totally Enclosed Non-Vented, Ball Bearing Motor • Constructed with Electro-polished 304 Stainless Steel Meets the USDA and the NSF Requirements for “Food Zones” • Designed to Withstand Moist/Wet Environments, High Pressure Cleaning with Concentrated Caustic Solutions without Affecting Performance or Function
PAGE 2
Washdown Air Circulators Component Parts / Accessories Motors - Hard Wired EDP No. Catalog No. F.L. Amps Ship Wt. Description 78039 5B 1.4 30 1/15 HP, 115V, 1 Phase, 2 Speed, Ball Bearing, ½” shaft (Stainless Steel) *BISSC Approved 78040 4G 3.87 32 1/4 HP, 115/230V, 1 Phase, Ball Bearing ½” shaft (Stainless Steel) *BISSC Approved 78042 4H 3.87 34 1/3 HP, 115/230V, 1 Phase, Ball Bearing, ½” shaft (Stainless Steel) *BISSC Approved Guards EDP No. Catalog No. Ship Wt.