Specifications

www.airmar-emea.com
Parts & Accessories
Hole Saws
“OOPs” Arbor, Forstners
82
“OOPS” Arbor—By Starrett
“OOPS” Arbor accepts two-threaded cutters.
[Size difference must be at least 4.8 mm
(3/16”).] Will accept 51 mm (2”) inner and
63 mm (2.5”) outer for redrilling an existing
51 mm (2”) hole to a 63 mm (2.5”) hole. This
will ease the installation of the B60
low-prole, Tilted Element™ transducer
requiring 63 mm (2.5”) hole.
Remove the drill bit from original arbor. The
“OOPS” Arbor, with secondary hole saw,
inserts into drill bit hole.
Breakdown of Parts
Saw Arbor
32 mm to 152 mm (1-1/4” to 6”)
HS-0A10
Net: € CALL
Other Size Hole Saws
HS-0007 22 mm (7/8”)
Net: € CALL
HS-1002 32 mm (1-1/4”)
Net: € CALL
HS-1003 35 mm (1-3/8”)
Net: € CALL
HS-3006 95 mm (3-3/4”)
Net: € CALL
Hole Saw
63.5 mm (2.5”)
HS-2004
Net: € CALL
“OOPS” Arbor
HS-0019
Net: € CALL
Hole Saw
51 mm (2”)
HS-2000
Net: € CALL
B60 Forstners Bit
244-3120
Net: € CALL
89 mm (3-1/2”) bit for recessing B60’s. Allows for ush mounting with
skim coat.