Transducers • NMEA Sensors & Accessories • WeatherStation® Instruments • GPS & Heading Sensors • Transducer Accessories NMEA 2000® Products TEL: 33 (0)2 23 52 06 48 FAX: 33 (0)2 23 52 06 49 sales@airmar-emea.
Airmar® EMEA Distributor Catalogue Airmar® Warranty Information About Airmar® EMEA Limited Warranty Airmar EMEA, located in Saint-Malo, France, distributes Airmar® Technology Corporation’s line of Transducers for Fishfinding and Instruments, NMEA Sensors and Accessories, WeatherStation® Instruments, GPS and Heading Sensors, and Marine Electronic Accessories throughout Europe, the Middle East, and Africa.
Table of Contents Specialty Products............................................................................................................................................................................................. 1 PB150 and PB200—WeatherStation® Instruments...................................................................................................................................................... 1 CA500—Underwater Color Camera..........................................................
Specialty Products WeatherStation® Instrument TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com PB150, NMEA 0183 The enhanced PB150 Ultrasonic WeatherStation® Instrument features higher-accuracy temperature readings and improved wind speed and direction accuracy. WeatherCaster™ PC Software version 2.0 puts your own personal weatherman on-board the boat, 24 hours a day. The easy-to-use program has multiple screen views and advanced setup features to customize what you want to see.
Specialty Products www.airmar-emea.com WeatherStation® Instrument PB150, NMEA 0183 PB150 WeatherStation® Instrument Protocol is NMEA 0183 / RS485 Many marine instruments currently available in the market cannot interpret and display all of the NMEA sentences that the Ultrasonic WeatherStation is capable of outputting.
Specialty Products WeatherStation® Instrument TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Specialty Products WeatherStation® Instrument www.airmar-emea.com PB200 Connections——NMEA 0183 and NMEA 2000 PB200, NMEA 0183 & NMEA 2000® ® PB200 to NMEA 2000® Network When connecting the PB200 WeatherStation® Instrument to a NMEA 2000® network backbone, a devicenet cable is needed. See page 5 for all cable options. NMEA 2000® cable PB200 to a Furuno NMEA 0183 Display or NavNet Device When using the WeatherStation® Instrument with a Furuno NMEA 0183 device, a directconnect interface cable is needed.
Specialty Products WeatherStation® Instrument TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Specialty Products Underwater Color Camera www.airmar-emea.com CA500 Combine the fish-finding power of an Airmar transducer with the viewing capability of the Airmar Camera and get the ultimate underwater observation system. This thru-hull camera will display what is directly below the boat, making it an ideal underwater fishing camera or underwater video surveillance/safety system. Simply connect the single cable to any display with a PAL or NTSC input and spy on the underwater world.
Specialty Products NMEA Heading Sensor TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Specialty Products NMEA Heading Sensor With GPS www.airmar-emea.
Specialty Products NMEA 2000® TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Transducers Smart™ Sensors www.airmar-emea.com DT800 Tilted Element™ The ceramic element is tilted inside the housing, which compensates for your boat’s deadrise. This aims the beam straight toward the bottom resulting in strong bottom echo returns and accurate depth readings at any speed. NMEA 2000® Smart™ Sensor Features • NMEA 2000 output: • 100 W RMS power • Maximum depth range 180 m (594’) • Minimum depth range 0.5 m (1.
Transducers Smart™ Sensors TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com DST800 Smart™—NMEA 2000® • • • • Thru-Hull Depth, Speed, and Temperature Echo sounding up to 61 m (200’) Fan shaped transducer beam means no performance loss on hulls with up to 22° of deadrise • Stable and accurate speed measurement from 0.9 to 52 knots • Retractable insert • Many housing options available • 6 m (19.8”) NMEA 2000 cable and connector P617V Plastic, B617V Bronze, SS617V Stainless ø 75 mm (2.
Transducers Smart™ Sensors www.airmar-emea.com DT800 Tilted Element™ The ceramic element is tilted inside the housing, which compensates for your boats deadrise. This aims the beam straight toward the bottom resulting in strong bottom echo returns and accurate depth readings at any speed. NMEA 0183 Smart™ Sensor Features • NEW Broadband 235 kHz Ceramic: • Broadband ceramic available with 12° and 20° tilt options • Enhanced depth performance • Maximum range 100 m (330’) • Minimum range 0.
Transducers Smart™ Sensors TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com NMEA 0183 B122 Smart™—NMEA 0183 • Provides Depth and Temperature • Long-stem accommodates thick hulls and steep deadrise vessels • High-Performance Fairing • Fairing allows for use with up to 28° deadrise hulls • 55 mm (2.18”) usable shaft length • 10 m (33’) cable length • Retractable insert Frequency: 235 kHz Cone: 12° ø 59 mm (2.33”) 75 mm (2.96”) 348 mm (13.69”) 2-12” threads 14 mm (0.55”) 164 mm (6.
Transducers Smart™ Sensors www.airmar-emea.com • Thru-Hull Depth, Speed, & Temperature • Echo sounding up to 61 m (200’) • Fan shaped transducer beam means no performance loss on hulls with up to 22° of deadrise • Stable and accurate speed measurement from 0.9 to 52 knots • Retractable insert provides ease of serviceability • Many housing options available • 10 meter cable, no connector Frequency: 235 kHz Cone: 11° x 46° P617V Plastic, B617V Bronze, SS617V Stainless ø 75 mm (2.
Transducers Transom-Mount TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com Quick Guide P48W—Good 100 W Transom-Mount • Best performing 100 W transom-mount • Adjustable beam settings • 100 W power • 200 kHz operation • Depth and Temperature • Designed for boats up to 7 m (23’) 52 mm (2.06”) 96 mm (3.79”) 130 mm (5.
Transducers Transom-Mount www.airmar-emea.com P23, P39. P52 • Transom-Mount • Depth Only • Sold with transom bracket • Replacement bracket—20-154, Net: € CALL • 7.6 m (25’) cable length P23 Frequency: 200 kHz Cone: 13° RMS Power: 250 W P23—200 kHz Transducers Raymarine® 30-924 Net: € CALL Generic FISO connector, Depth only, 7.6 m (25’) cable Fits: Raymarine instruments Generic 30-928 Net: € CALL 31-307-1-41 Net: € CALL 8-pin Fuji connector, Depth only, 7.
Transducers Transom-Mount TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com P48W Wide-Beam • The widest transom-mount transducer on the market • Depth and Temperature • 200 kHz operation • 100 Watts RMS power (800 Watts Peak-to-Peak) • Maximum Depths: 122 m (400’) • Transom or trolling-motor mounting • Boat Size: 5 m to 8 m (18’ to 25’) • True 38° x 12° beam that is measured at -3 dB The new P48W transom-mount is designed for tournament–circuit freshwater bass fishermen.
Transducers Transom-Mount www.airmar-emea.com P66 Airmar’s P66 is the best performing and most popular transom-mount, TRIDUCER® Multisensor in the market for many reasons. Foremost, the 50 kHz & 200 kHz, oversized, ceramic element produces focused beams highlighting detail in the water column and on the bottom surface.
Transducers Transom-Mount TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com TM258 The industry’s first 1 kW transom-mount transducer has a new high-performance mounting bracket. The sleek, new bracket makes the TM258 easier to install. Additionally, its streamlined shape will give you improved high-speed performance up to 25 knots (29 MPH).
Transducers Transom-Mount www.airmar-emea.
Transducers Transom-Mount TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com TM260 The new TM260 takes the legendary performance of the B260 to your vessel’s transom. This top-of-the-line broadband transom-mount brings crystal clear imaging to any of today’s fishfinders. The large 200 kHz element and the seven-element 50 kHz array are excellent for bait and game fish separation along with detecting ground fish holding tight to the bottom.
Transducers Tilted Element™ www.airmar-emea.com Smart™ Sensor Tilted Element™ • The tilted element compensates for hull deadrise • Designed for displaying digital depth and temp via NMEA 0183 or 2000 • 235 kHz Broadband operation • Depth and Temperature • Fixed 0°, 12°, and 20° tilted versions • No interference with other echosounders on the vessel • No fairing to install P617V Plastic, B617V Bronze, SS617V Stainless Steel ø 75 mm (2.
Transducers Tilted Element™ TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com NMEA 2000® Smart™ Sensors DT800 Tilted Element™ Smart™ Sensor Features • NMEA 2000 output: • 100 W RMS power • Maximum depth range 180 m (594’) • Minimum depth range 0.5 m (1.
Transducers Tilted Element™ www.airmar-emea.com DT800 Tilted Element™ The ceramic element is tilted inside the housing, which compensates for your boats deadrise. This aims the beam straight toward the bottom resulting in strong bottom echo returns and accurate depth readings at any speed.
Transducers Tilted Element™ TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com 12° Narrow 200 kHz 45° Wide 50 kHz Frequency: 50/200 kHz Cone: 50 kHz—45° 200 kHz—12° RMS Power: 600 W Available in 12° and 20° 60 x 2 threads ø 84 mm (3.
Transducers Tilted Element™ www.airmar-emea.com 45° Wide 50 kHz Frequency: 50/200 kHz Cone: 50 kHz—45° 200 kHz—12° RMS Power: 600 W 60 x 2 threads ø 84 mm (3.75”) 12° Narrow 200 kHz Available in 12° and 20° 88 mm (3.
Transducers Tilted Element™ TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Transducers Tilted Element™ www.airmar-emea.com 6° Narrow 200 kHz 22° Wide 50 kHz The ceramic arrays are tilted inside the housing giving you a perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW Tilted Element Transducers.
Transducers Tilted Element™ TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Transducers Tilted Element™ www.airmar-emea.
Transducers Tilted Element™ TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Transducers Tilted Element™ www.airmar-emea.
Transducers Tilted Element™ TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Transducers Tilted Element™ www.airmar-emea.
Transducers Tilted Element™ TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Transducers 1 kW Switchboxes www.airmar-emea.com SB264, SB260 SB264 160 mm (6.30”) 7 mm (0.28”) 146 mm (5.75”) Existing B260 50/200 kHz • Use when adding the SS264 200 kHz wide-beam with an existing 1 kW transducer • Allows you to switch between narrow or wide-beam 200 kHz frequencies • Panel-mount waterproof switch • For use with all 1 kW fishfinders • Operating Voltage: 9 VDC to 30 VDC 7 mm (0.28”) 160 mm (6.30”) SB264 Switchbox 4.6 mm (0.
Transducers Thru-Hull, Low-Profile TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com • • • Thru-Hull Depth, Speed, & Temperature Echo sounding up to 61 m (200’) Fan shaped transducer beam means no performance loss on hulls with up to 22° of deadrise • Stable and accurate speed measurement from 0.
Transducers Thru-Hull, Low-Profile www.airmar-emea.com P319 • • • • Plastic housing Depth Only Usable shaft length: ~63.5 mm (2.5”) Replacement nut — 04-004, Net: € CALL • Replacement washer— 09-452, Net: € CALL • 10 m (33’) cable length P319 ø 78 mm (3.08”) 2-12” threads 94 mm (3.72”) ø 51 mm (2.00”) Frequency: 50/200 kHz Cone: 50 kHz—45° , 200 kHz—12° RMS Power: 600 W ø 75 mm (2.94”) 5 mm (0.
Transducers Thru-Hull, Low-Profile TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com B117, P17 • • • • • B117 Bronze, low-profile housing Depth Only Usable shaft length: ~66.5 mm (2.62”) Replacement nut—405, Net: € CALL 10 m (33’) cable length Frequency: 50/200 kHz Cone: 50 kHz—45° , 200 kHz—12° RMS Power: 600 W ø 78 mm (3.08”) 2-12” threads 94 mm (3.72”) ø 51 mm (2.00”) ø 75 mm (2.94”) 5 mm (0.
Transducers Thru-Hull, Low-Profile, Stem www.airmar-emea.com B17, P17, SS505 Frequency: 200 kHz Cone: 12° RMS Power: 250 W B17 ø 78 mm (3.08”) 30 mm (1.19”) 2-12” threads 89 mm (3.49”) ø 51 mm (2.00”) ø 75 mm (2.94”) 5 mm (0.20”) B17—200 kHz Transducer Generic N/C 31-241-1-04 Net: € CALL No connector, Depth only, bronze housing Fits: Bare wire applications Frequency: 200 kHz Cone: 12° RMS Power: 250 W P17 ø 75 mm (2.94”) 30 mm (1.19”) 2-12” threads 94 mm (3.72”) ø 51 mm (2.
Transducers Thru-Hull, TRIDUCER® TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com The B744V TRIDUCER Multisensor provides you with depth, speed, and temperature in one thru-hull housing. This unit is ideal for all 600 W fishfinders and requires only a single hole in the hull. The High-Performance Fairing provides a streamlined installation and allows for a vertical beam. At speeds above 30 knots (34 MPH), the unit will produce clear images and solid bottom tracking.
Transducers Thru-Hull, TRIDUCER® www.airmar-emea.com B744VL The B744VL is a long stem version of the B744V, TRIDUCER Multisensor. This long-stem model accommodates thick hulled powerboats, and sailboats with a steep deadrise. • Long Stem version of the B744V • Depth, Speed, and Temperature • Retractable with self-closing sea valve Frequency: 50/200 kHz Cone: 50 kHz—45° , 200 kHz—12° RMS Power: 600 W 230 mm (9.07”) ø 51 mm (2.00”) 76 mm (3.
Transducers Thru-Hull, TRIDUCER® TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Transducers Thru-Hull, Stem www.airmar-emea.com 342 mm (13.47”) Maximum Depth Range: M22 x 1.5 116 mm (4.57”) Frequency: 50/200 kHz Cone: 50 kHz—45° , 200 kHz—12° RMS Power: 600 W 55 mm (2.15”) 102 mm (4.01”) 50 kHz—235 m to 353 m (800’ to 1,200’) 200 kHz—118 m to 206 m (400’ to 700’) ø 22 mm (0.86”) 75 mm (2.94”) Bronze housing Depth and Temperature High-Performance Fairing included Usable shaft length: ~92 mm (3.62”) Standard fairing block—33-351-01 66 mm (2.58”) • • • • • B45 B45 30 mm (1.
Transducers Thru-Hull, 1 kW TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com Quick Guide 1 kW Thru-Hull Entry-level 1 kW 1 kW power 50/200 kHz operation Depth and Temperature Includes High-Performance Fairing 107 mm (4.20”) • • • • • 546 mm (21.50”) 121 mm (4.78”) B258—Better 178 mm (7.00”) 108 mm (4.25”) 152 mm (6.00”) M30-2 threads 51 mm (2.00”) 1 kW Twin Wide-Beam Thru-Hull 133 mm (5.25”) 216 mm (8.50”) 1”-11 1/2 NPS 244 mm (9.
Transducers Thru-Hull, 1 kW www.airmar-emea.com B258 Frequency: 50/200 kHz Cone: 50 kHz—14° x 23° , 200 kHz—3° x 5° RMS Power: 1 kW 107 mm (4.20”) 121 mm (4.78”) 178 mm (7.00”) M30-2 threads 152 mm (6.00”) • Entry-level 1 kW thru-hull • Depth and new fast-response water-temperature sensor • Recommended for sport fishing boats above 8 m (26’) and small to mid-size commercial fishing boats • Compatible with single-transmission line sounders • High-Performance Fairing included 546 mm (21.
Transducers Thru-Hull, 1 kW TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com Frequency: 50/200 kHz Cone: 50 kHz—14° x 23° , 200 kHz—3° x 5° RMS Power: 1 kW 107 mm (4.20”) 178 mm (7.00”) M30-2 threads 152 mm (6.00”) • Entry-level 1 kW thru-hull • Recommended for sport fishing boats above 8 m (26’) and small to mid-size commercial fishing boats • Compatible with single-transmission line sounders • High-Performance Fairing included 546 mm (21.50”) 121 mm (4.
Transducers Thru-Hull, 1 kW www.airmar-emea.com B260 Frequency: 50 kHz and 200 kHz Cone: 50 kHz—19° , 200 kHz—6° RMS Power: 1 kW 133 mm (5.25”) 114 mm (4.50”) 216 mm (8.50”) 1”-11 1/2 NPS 244 mm (9.
Transducers Thru-Hull, 1 kW TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com Frequency: 50 kHz and 200 kHz Cone: 50 kHz—19° , 200 kHz—6° RMS Power: 1 kW 133 mm (5.25”) 216 mm (8.50”) 1”-11 1/2 NPS 244 mm (9.
Transducers Thru-Hull, 1 kW www.airmar-emea.com 133 mm (5.25”) • Tuna/Marlin Fishermen—Detect bait and gamefish in the upper water column that would go unseen with a traditional narrow-beam transducer. • Jig Fishermen—Seeing your jigs on the echosounder screen while bottom fishing can help avoid bottom hang-ups. Seeing a tuna attack your jigs on the echosounder display lets you reel up loose lines before it is too late.
Transducers Thru-Hull, 1 kW TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com 133 mm (5.25”) 216 mm (8.50”) 1”-11 1/2 NPS 244 mm (9.
Transducers External-Mount www.airmar-emea.com 102 mm (4.01”) 2 to 3 kW External-Mount 587.2 mm (23.12”) 169.7 mm (6.
Transducers External-Mount TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com R99 Broadband 139 mm (5.48”) 570 mm (22.44”) Frequency: 38 to 75 kHz and 130 to 210 kHz Cone: Adjustable RMS Power: 2 kW 102 mm (4.
Transducers External-Mount www.airmar-emea.com R209 Broadband Want to increase your catch? Want to detect ground fish holding tight to the bottom in deep-water? Want to mark bait fish as closely-spaced individual fish? Then Airmar’s R209 is the answer.
Transducers External-Mount TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Transducers In-Hull www.airmar-emea.com P79—Good Quick Guide 600 W In-Hull Entry-level in-hull 600 W power 50/200 kHz operation Mounts in a tank inside the hull— no holes to drill • Can be installed while vessel is in the water 89 mm (3.49”) • • • • 22° ø 98 mm (3.86”) 1 kW In-Hull 152 mm (6.00”) 170 mm (6.70”) 221 mm (8.69”) 221 mm (8.69”) 436.2 mm (17.
Transducers In-Hull The P79 is easy-to-install, accommodating hull deadrise angles up to 22º. 1— Mount the base flange inside the hull 2— Adjust the locking ring for the correct hull deadrise angle 3— Fill the base with non-toxic anti-freeze (propylene glycol) 4— Turn and lock the transducer into the base P79 • Adjusts to hull deadrise angles from 2° to 22° • No holes to drill • Depth Only • Recommended for solid fiberglass hulls • Epoxies to aluminum hulls under 0.38 mm (0.
Transducers In-Hull www.airmar-emea.
Transducers In-Hull TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Transducers In-Hull www.airmar-emea.com R199 Broadband Maximize the performance of any 1 kW or 2 kW echosounder with the R199 in-hull transducer. Designed with Airmar’s exclusive Broadband Ceramic Technology, the 130 kHz to 210 kHz ceramic provides excellent resolution without sacrificing sensitivity. The R199 packs an 88 mm (3.5”) broadband ceramic that operates between 130 kHz to 210 kHz, and 15-elements operating at 38 kHz to 75 kHz—just like its externally mounted cousin, the R99.
Transducers In-Hull TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Transducers In-Hull www.airmar-emea.com 436.2 mm (17.18”) 12° 375 mm (14.75”) 223.5 mm (8.80”) Because the R399 can operate over a broad high and low-frequency range, next generation fishfinders can be made “tunable”, so fishermen can “dial-in” the best frequency for the target fish species or conditions. 221.6 mm (8.
Speed/Temp. Sensors Thru-Hull TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com Innovation at its finest! If one consistently demands the best, Airmar’s CS4500 Ultrasonic Speed Sensor delivers. Ultra-accuracy is foremost! With no moving parts, the ultrasonic sensor is capable of speed reading accuracy as low as 0.1 knots (0.1 MPH). By eliminating the traditional paddlewheel, there is no fouling, and drag is reduced to a minimum.
Speed/Temp. Sensors Thru-Hull www.airmar-emea.
Speed/Temp. Sensors Thru-Hull TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com • Speed and Temperature • Thru-hull, low-profile housing • Designed with self-closing valve. Stops most waterflow upon removal of insert. ST850 P17 Plastic, B17 Bronze, SS577 Stainless Steel ø 78 mm (3.08”) Supply Voltage: 5 VDC to 25 VDC Speed Range: 2 to 45 knots (2 to 52 MPH) Bronze and Stainless Steel ST850—Parts and Accessories 30 mm (1.19”) 2-12” threads Plastic 89 mm (3.49”) ST850, ST300 ø 51 mm (2.
Speed/Temp. Sensors Thru-Hull & Transom-Mount www.airmar-emea.com ST600, ST650, ST61, NMEA 0183 Box • Speed and Temperature • Plastic, thru-hull, low-profile housing • Designed with self-closing valve. Stops most waterflow upon removal of insert. • Usable shaft length: ~57 mm (2.
Temperature Sensors Thru-Hull & Transom-Mount TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com T42, T80 • Bronze, thru-hull, analog temperature • 10,000 ohm thermistor T42 Supply Voltage: 6 VDC to 28 VDC Supply Current: 30 mA maximum Temp Range: 0°C to 30°C (32°F to 86°F) Ø 38 mm (1.50”) 131 mm (5.16”) M22-1.5 threads 7 mm (0.26”) Ø 21 mm (0.94”) Ø 62 mm (2.
Transducers Navigation & Survey www.airmar-emea.com M42, M153, M157 • Commercial fishing • Navigation survey M42 Frequency: 38 kHz Cone: 10° x 12° RMS Power: 2.
Transducers Navigation & Survey TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Transducers Navigation & Survey www.airmar-emea.com M194, R155 • Shallow-water survey 48 mm (1.88”) 6 mm (0.24”) typical 12 mm (0.48”) ø 11 mm (0.44”) ø 6 mm (0.24”); 6 places equally spaced 41-203-1-01 ø 95 mm (3.74”) M194—200 kHz Transducer Atlas® Net: € CALL 72 mm (2.83”) ø 75 mm (2.95”) Frequency: 200 kHz Cone: 8° RMS Power: 500 W ø 110 mm (4.
Transducers Navigation & Survey TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com SS510, SS538, SS549 • Shallow-water survey SS510 ø 70 mm (2.75”) Frequency: 200 kHz Cone: 9° RMS Power: 500 W 43 mm (1.69”) 1/2”-14 NPS threads SS510—200 kHz Transducer No connector, Depth only Fits: Knudsen Odom, and others 84 mm (3.29”) 25 mm (1.00”) Net: € CALL 43 mm (1.71”) Knudsen® Odom 41-200-1-01 ø 22 mm (0.86”) • Shallow-water survey SS538 72 mm (2.85”) ø 108 mm (2.
Gillnet Pinger www.airmar-emea.com Subcon® Extension Cable Subcon® Extension Cable for Navigation & Survey Transducers Subcon® 30-060-02 Net: € CALL Cable Length: 30 m (10’) The Gillnet Pinger is designed to save the lives of marine mammals, particularly the harbor porpoise, by warning that a gillnet is present. Our streamlined, rugged design with double o-rings and a single battery provide a virtually maintenance-free device. ø 52 mm / 51 mm (2.07” / 2.
Parts & Accessories Housings TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Parts & Accessories Housings www.airmar-emea.
Parts & Accessories Blanking Plugs TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com ST600, ST610 20-600 Net: € CALL Fits: Raymarine ST600, ST610 speed and temperature sensor ST650 33-376-01 Net: € CALL Fits: ST550, ST100 speed and temperature sensors and P17, P217, P314, B17, B21, B119 depths sensors. Has plastic cap nut.
Parts & Accessories Hull Nuts www.airmar-emea.
Parts & Accessories Cap Nuts, Spacers, Washers TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Parts & Accessories Paddlewheels www.airmar-emea.com P37, P52, P55, S61 33-105-03 Net: € CALL Transom paddlewheel and carrier Fits: BP37, P52, P55, and S61 multi-function transducers and speed sensors with detachable paddlewheel assembly Old P66 33-346-02 Net: € CALL Complete transom wheel assembly for pre 2004 style P66 TRIDUCER® Multisensor Contains: 1 paddlewheel and carrier with all parts necessary for replacement Note: Please compare wheels. Newer P66’s use #33-346-03 kit.
Parts & Accessories Paddlewheels TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com Thru-Hull DST800 33-398-04 Net: € CALL Thru-hull spares kit for DST800 TRIDUCER® Multisensor Contains: • 1 paddlewheel and shaft • 4 o-rings B744V 33-113 Net: € CALL Thru-Hull TRIDUCER Multisensor spares kit.
Parts & Accessories www.airmar-emea.com Paddlewheels Thru-Hull S850, ST850 33-536-01 Net: € CALL Thru-hull spares kit for S850, ST850. Contains all wearing parts in the paddlewheel and plug assemblies. Contains: • 1 paddlewheel and shaft • 4 o-rings • 1 valve sleeve Note: Not for Raymarine ST600 and ST800. ST650 uses a clevis pin.
Parts & Accessories Brackets TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com Transom P66 33-479-01 P26, P37, P52, P55 Net: € CALL Fits: Newer style P66 transducers Identifier: Horseshoe shaped slot in cover where cable exits.
Parts & Accessories Hole Saws www.airmar-emea.com “OOPs” Arbor, Forstners “OOPS” Arbor accepts two-threaded cutters. [Size difference must be at least 4.8 mm (3/16”).] Will accept 51 mm (2”) inner and 63 mm (2.5”) outer for redrilling an existing 51 mm (2”) hole to a 63 mm (2.5”) hole. This will ease the installation of the B60 low-profile, Tilted Element™ transducer requiring 63 mm (2.5”) hole. “OOPS” Arbor—By Starrett Remove the drill bit from original arbor.
Parts & Accessories Bulk Cable TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com Bulk Transducer Cable Bulk cable sold by the meter Part No. Description Price Per Meter 06-002 C2—Shielded with 2-conductors. 5 mm (0.20”) O.D. 22 gauge wire. Depth or temperature applications. Net: € CALL 06-009 C9—Shielded with 4-conductors. 4.3 mm (0.17”) O.D. 26 gauge wire. Speed and temperature applications. Net: € CALL 06-032 C32—Shielded twisted pair and 4-conductors with overall shield. 6.6 mm (0.
Parts & Accessories Fairing Blocks www.airmar-emea.com Fairing Block—Parts and Accessories Fairing blocks are especially designed to ease installation of thru-hull transducers and provide a level mounting surface. The high impact polypropylene is easily cut and shaped to the hull. Fairing Block Dimensions Dimensions are taken from the top flat rectangular surface. Due to the tapered nature of most high-performance blocks, the length is varied by the angle and depth of your cut.
Parts & Accessories Fairing Blocks TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com SS505 HP 33-355-01 Net: € CALL Model: SS505, High-Performance Dimensions: 349 mm x 76 mm x 75 mm T (13.75” x 3” x 2.94” T) 85 B122 HP 33-409-01 Net: € CALL Model: B122, High-Performance Dimensions: 343 mm x 75 mm x 75.2 mm T (13.5” x 2.94” x 2.96” T) B256 HP 33-357-02 Net: € CALL Model: B256, High-Performance Dimensions: 559 mm x 124 mm x 108 mm T (22” x 4.88” x 4.
Parts & Accessories Hull Inserts www.airmar-emea.com Hull Inserts—Parts and Accessories The molded pocket system was developed to allow boat builders a way to provide factory transducer provisions into their hulls. The molded pocket system forms a common transducer recess into the same location on each vessel produced. The pocket is sized to accept the popular B260, SS260 and SS270W transducers with inexpensive inserts available to allow installation of many other popular models.
Parts & Accessories Transducer Wrenches TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Parts & Accessories Transducer Paints www.airmar-emea.com Transducer Paint MDR-720 (2 oz) Transducer Paint Net: € CALL MDR’s anti-fouling transducer paint is formulated to resist barnacles and marine growth in fresh or salt water, thereby improving depth sounder performance. The brush in the cap makes application easy on both transom and thru-hull, plastic or bronze transducers. The water-based cuprous oxide formula will not attack the transducer face like some solvent based bottom paints.
Parts & Accessories Transducer Testers TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com EDI® • Check Transducers for Proper Operation—Determine if a transducer is good or bad within seconds TT2D • Extended Frequency Range—500 Hz to over 600 kHz.
Parts & Accessories Transducer Testers www.airmar-emea.com EDI® Adaptor Cables EDI® Transducer Test Cables EDI Test Cables are available for most common transducers. These adapters allow you to test a transducer without having to remove the connector or probe the pins. These are a direct fit for the T3D but can also be used with the TT2D in conjunction with the EDI-RC8 cable.
NMEA Networking NMEA 2000® Airmar® Products PB200 WeatherStation® Instrument 44-802-2-01 See Specialty Products Section for Details. H2183 Heading Sensor 44-725-1-01 See Specialty Products Section for Details. GH2183 Heading Sensor With GPS 44-710-1-01 See Specialty Products Section for Details. TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com DT800 Depth and Temperature 44-133-2-02 DST800 TRIDUCER® Multisensor 44-127-1-02 See Specialty Products Section for Details.
NMEA Networking NMEA 2000® www.airmar-emea.com DT800 Tilted Element™ The ceramic element is tilted inside the housing, which compensates for your boats deadrise. This aims the beam straight toward the bottom resulting in strong bottom echo returns and accurate depth readings at any speed. Smart™ Sensors Smart™ Sensor Features • NMEA 2000 output: • 100 W RMS power • Maximum depth range 180 m (594’) • Minimum depth range 0.5 m (1.
NMEA Networking NMEA 2000® TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com DST800 Smart™—NMEA 2000® • • • • Thru-Hull Depth, Speed, and Temperature Echo sounding up to 61 m (200’) Fan shaped transducer beam means no performance loss on hulls with up to 22° of deadrise • Stable and accurate speed measurement from 0.9 to 52 knots • Retractable insert • Many housing options available • 6 m (19.8”) NMEA 2000 cable and connector P617V Plastic, B617V Bronze, SS617V Stainless ø 75 mm (2.
NMEA Networking NMEA 0183 www.airmar-emea.com DT800 Tilted Element™ The ceramic element is tilted inside the housing, which compensates for your boats deadrise. This aims the beam straight toward the bottom resulting in strong bottom echo returns and accurate depth readings at any speed. Smart™ Sensors Smart™ Sensor Features • NEW Broadband 235 kHz Ceramic: • Broadband ceramic available with 12° and 20° tilt options • Enhanced depth performance • Maximum range 100 m (330’) • Minimum range 0.
NMEA Networking NMEA 0183 TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com Smart™ Sensors B122 Smart™—NMEA 0183 • Provides Depth and Temperature • Long-stem accommodates thick hulls and steep deadrise vessels • High-Performance Fairing • Fairing allows for use with up to 28° deadrise hulls • 55 mm (2.18”) usable shaft length • 10 m (33’) cable length • Retractable insert Frequency: 235 kHz Cone: 12° ø 59 mm (2.33”) 75 mm (2.96”) 348 mm (13.69”) 2-12” threads 14 mm (0.55”) 164 mm (6.
NMEA Networking NMEA 0183 www.airmar-emea.com • Thru-Hull Depth, Speed, & Temperature • Echo sounding up to 61 m (200’) • Fan shaped transducer beam means no performance loss on hulls with up to 22° of deadrise • Stable and accurate speed measurement from 0.9 to 52 knots • Retractable insert provides ease of serviceability • Many housing options available • 10 meter cable, no connector Frequency: 235 kHz Cone: 11° x 46° P617V Plastic, B617V Bronze, SS617V Stainless ø 75 mm (2.
NMEA Networking NMEA 2000® TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Cables 600 W Mix and Match www.airmar-emea.com 600 W Mix and Match Cables Mix and Match cables are available for purchase separately. Although all Mix and Match transducers are sold with the appropriate cable needed for installation, replacements are available separately to allow transducer conversions or for replacing lost or damaged cables. • 9 m (29.
Cables 1 kW Mix and Match TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.com 1 kW Mix and Match Cables Mix and Match cables are available for purchase separately. Although all Mix and Match transducers are sold with the appropriate cable needed for installation, replacements are available separately to allow transducer conversions or for replacing lost or damaged cables. • 9 m (29.
Cables Extension www.airmar-emea.com Furuno® Raymarine® “C/E” 33-203-03 (6 m; 20’) Net: € CALL 33-369-04 (3 m; 10’) Net: € CALL 33-203-04 (10 m; 33’) Net: € CALL 33-369-03 (5 m; 16’) Net: € CALL 33-203-05 (14 m; 45’) Net: € CALL 10-pin Extension Cable Fits: Furuno 10-pin units Extension cable Fits: “C/E” Series Garmin® 33-837-01 (3 m; 10’) Net: € CALL Extension cable Fits: “A” Series Black Box 33-906-02 (3 m; 10’) Net: € CALL 33-525-01 (4.
Cables & Connectors Adapter TEL: 33 (0)2 23 52 06 48 EMAIL: sales@airmar-emea.
Video Scope Visual Optics® www.airmar-emea.com Video Scope All Models Include: • Waterproof, flexible Staylok shaft • High output LED illumination • 4 AA batteries with 5 hours of operation • Mirror and magnet accessories • Poly pro storage case • 1 year warranty Video Stik VS36-10WW VO Scope Net: € CALL VO24-10WW Net: € CALL 910 mm (36”), 10 mm (0.4”) shaft, 63.5 mm (2.5”) color viewing screen 610 mm (24”), 10 mm (0.
NMEA 2000® Products
Airmar® EMEA Distributor Catalogue Airmar® Warranty Information About Airmar® EMEA Limited Warranty Airmar EMEA, located in Saint-Malo, France, distributes Airmar® Technology Corporation’s line of Transducers for Fishfinding and Instruments, NMEA Sensors and Accessories, WeatherStation® Instruments, GPS and Heading Sensors, and Marine Electronic Accessories throughout Europe, the Middle East, and Africa.
Transducers • NMEA Sensors & Accessories • WeatherStation® Instruments • GPS & Heading Sensors • Transducer Accessories NMEA 2000® Products TEL: 33 (0)2 23 52 06 48 FAX: 33 (0)2 23 52 06 49 sales@airmar-emea.
