User Manual

Flat Frame
(
SDG13~300, excluding 60AS/100S/150AS
)
The interior of the machine is flatly constructed so as to be
easily cleaned.
Mounting and Demounting Fuel Tank
Mounting and demounting fuel tank has been made easier
by making the bottom floor entirely flat. It is easy to clean the
interior by removing the fuel tank.
Inspection and
Cleaning Radiator
For SDG series inspection of
radiator and cleaning radiator
can be easily performed by
removing both side front covers
and dividable fan shrouds.
Maintenance Cycle
Newly-Designed Panel Construction
(
excluding100S
)
The bonnet is of panel constructed type for easily
dismantling and assembling for maintenance.
Daily inspection such as engine oil and coolant level can be
done by opening the right side door.
For SDG45 & 60, one battery of two mounted batteries has
been eliminated, thus dedicated to reducing industrial waste
and maintenance cost.
Completely Monitoring System
For SDG60~150, 300S, in order to eliminate the electric
fault when restarting engine, they are provided with shunt trip
as standard equipment to trip the main circuit breaker in case
of emergency shutdown. If electric fault occurs, the warning
lamp goes on and opens the generator breaker.
Warning Lamps & Emergency Stop
Model
SDG13 45
SDG60 150 ,300
SDG100S-F 220S-F
SDG220 ,400 ,500
SDG13,25,220
SDG45~150
SDG300
SDG400,500
Engine oil
250
500
250
500
Oil filter
500
500
250
500
Fuel filter
500
500
500
500
Air element
1,000
1,000
1,000
1,000
Engine Starting Efficiency
For SDG13~220, engine preheating system consists of
quick heating glow plug to easily start up engine in low
temperature conditions.
SDG220~500 are driven by high start-up engine which
exercises great power for earth auger and vibro-hammer
operations requiring instant electric flow. Start-up
characteristics have been more improved for electric motor
start-up as well as turbo charger and governor improved.
Control Panel
Control devices for generator and electrical appliances for
engine are concentrated inside the control panel for better
maintenance.
Electronic Governor
(
SDG13~45,100S-F~150S-F,220,400,500
)
Stable engine speed can be secured because engine
speed is made easier to be adjusted.
It is possible to select frequency and make fine adjustment
of engine speed only by moving up and down "Switch for fine
adjustment of engine speed". It is also possible easily to
perform" Idling Operation" with the slowdown switch.
1 For the items marked with a asterisk, first run in oil / filter change 50hr. 2 For the items marked with a asterisk, first run in oil / filter change 250hr.
unit : per hour
Model
Panel light
Voltmeter
Ammeter
Frequency meter
Fuel gauge with hour meter
Water temperature meter
Three phase circuit breaker
Voltage regulator
Current selector switch
Leakage relay
Output indicator lamp
Warning lamps
(For details, see the followings)
Starter switch
Panel light switch
Operation mode selection switch
Frequency selection switch
Warning lamp goes on and it causes Engine emergency stop
Warning lamp goes on
Breaker OFF
Easy Maintenance Operation
Safety
Maintenance with Great Ease
Oil
press.
Drop
Water
temp.
rise
Faulty
Battery
charging
Overcurrent,
Short-circuit
Electric
Leakage
Over
Speed
Air filter
Clogging
1
1
1
2
1
1
1
2
SDG45S-F Panel
Radiator
Radiator
Fuel filter
Fuel air-bleeding
electromagnetic pump
Sedimentor
Reserve tankFuel pumpAir cleaner
SDG45S-F
Engine oil
filler port
Engine oil
filter
Engine oil
level gauge
6 7